Sound recorder Audio-Technica AT-VM95EN/H

Description:

The AT-VM95EN/H combo kit includes the AT-VM95EN cartridge pre-installed in the AT-HS6BK universal headshell holder with 1/2-inch cartridge mount. The AT-VM95EN elliptical needle cartridge is another model in the VM95 series of cartridges from a well-known Japanese company. The elliptical stylus is made of solid diamond and with radii of 0.3 x 0.7 mil tracks the recording groove with high precision for excellent sound reproduction.

Elliptical

In all VM cartridges, instead of using one large magnet, two V-shaped magnets are used, which correspond to the positions of the left and right channels of the stereo recording groove, providing excellent channel separation and extended frequency response. The special design of the cartridge coil provides a powerful output level of 4.0 mV.

The needle is made of solid diamond, this reduces the working mass of the vibration system, providing fuller frequency reproduction and less tracking distortion than a composite stylus. The elliptical stylus is more subject to the influence of the place of placement, so it needs more precise and careful adjustment, first of all, the vertical tracking angle (VTA). The needle holder (cantilever) in this model is made of aluminum, its tube has a regular straight shape.

And since all VM95 series cartridges share the same body, the stylus can be replaced with any of the AT-VMN95's six interchangeable styluses. For elliptic sharpening, it is recommended to change the stylus to a new one after 300 hours of use.

The lightweight AT-HS6BK headshell with a standard SME-type 4-pin connector with a diameter of 8mm is compatible with a wide range of tonearms. Cast aluminum housing reduces unnecessary vibrations. A wire with highly reliable gold-plated contacts is used for the connection between the head shell and the cartridge.

Key features:

- Cartridge type: MM

-Needle sharpening type: Elliptical (0.3 x 0.7 mil)

-Vertical tracking angle (VTA): 23°

-Headshell: AT-HS6BK

-Interchangeable stylus: Yes

-Replaceable stylus model: AT-VMN95EN

-Cantilever material: aluminum

-Cartridge housing material: ABS plastic

- The force of pressing the needle, (recommended): 2.0g

-Cartridge mount: ½ inch mount

-Headshell connection with tonearm: Bayonet, H-4, SME-type, 8mm

-Weight of headshell with cartridge: 15.5g

Features:

Purpose: universal

Cartridge type: MM

Type of needle sharpening: Elliptical

Interchangeable stylus: Yes

Replacement stylus model: AT-VMN95EN

Compatibility: AT-VMN95C; AT-VMN95E; AT-VMN95EBK; AT-VMN95EN; AT-VMN95ML; AT-VMN95SH

Cantilever material: aluminum

Frequency range, Hz: 20 - 23000

Body material: ABS plastic

Needle clamping force, (recommended), g: 2.0

Phonocorrector input capacitance, pF: 100 - 200

Phono corrector input impedance, Ohm: 47000

Dimensions (W x H x D), mm: 21.4 × 21.2 × 62.4

Weight, g: 15.5

Tags: Sound recorder Audio-Technica AT-VM95EN/H